China 45W Constant Current 0-10V CCT Dimmable LED Driver Suppliers, Manufacturers - Factory Direct Price

Product Details

You are welcomed to come to our factory to buy the latest selling, low price, and high-quality 45W Constant Current 0-10V CCT Dimmable LED Driver, STARWELL looks forward to cooperating with you.

PE-N45ACA adopts two-way signal control, one way to control brightness and the other way to control color temperature. The raw materials used are first-line brands and imported chip ultra deep dimming design, which matches a variety of intelligent dimming systems on the market. PWM dimming output controls LED brightness and accurately controls color temperature. Silicone heat conduction process is a dopted internally, and the heat balance of electronic components is more stable.

45W Constant Current 0-10V CCT Dimmable LED Driver Features:

1. Integrate multiple dimming and color matching interfaces

2. 0-10v/1-10v adaptive

3. Digital control output is adopted, and there is no stroboscopic

4. International general AC input 100-250V range

5. Natural air cooling, moisture-proof, heat conduction and silica gel heat dissipation process

6. Deep dimming design

7. Multiple protection functions

8. Output fast voltage terminal, safe and convenient

9. Crimping design, convenient and fast

10. 8 gear current selection

11. TUV CE SAA ENEC certificate

12.147.5*43*30mm

45W Constant Current 0-10V CCT Dimmable LED Driver Model list:

0/1-10V CCT constant current dimming

Series	Dimming	Model	Input	Power	PF	Output current	Output Voltage
PE-N14ACA 3-15W flicker free	PWM 10V 100K Potentiometer one way CCT one way dimming	PE-N14ACA42	AC100-250V	15W	0.88-0.96PF THD<10%	25-42V	150/180/200/250/280/ 300/320/350mA
PE-N20ACA 8-20W flicker free	PWM 10V 100K Potentiometer one way CCT one way dimming	PE-N20ACA42	AC100-250V	21W	0.88-0.96PF THD<10%	25-42V	200/250/280/300/350/ 400/450/500mA
PE-N30ACA 15-30W flicker free	PWM 10V 100K Potentiometer one way CCT one way dimming	PE-N30ACA42	AC100-250V	29.4W	0.88-0.96PF THD<10% 内	25-42V	350/400/450/500/550/ 600/650/700mA
PE-N45ACA 30-44W flicker free	PWM 10V 100K Potentiometer one way CCT one way dimming	PE-N45ACA42	AC100-250V	44.1W	0.88-0.96PF THD<10%	25-42V	700/750/800/850/900/ 950/1000/1050mA

45W Constant Current 0-10V CCT Dimmable LED Driver Application:

1.Led two-color light source

2.Villa intelligent lighting

3.Wireless intelligent lighting system can be accessed

4.Museum lighting

45W Constant Current 0-10V CCT Dimmable LED Driver Specification:

Model		PE-N30ACA42	PE-N45ACA42
OUTPUT	Output Voltage	25-42Vdc	25-42Vdc
	Max Output Voltage	42Vdc	42Vdc
	Non-load Output Voltage	53Vdc	53Vdc
	Output Current	350/400/450/500/550/600/650/700mA	700/750/800/850/900/950/1000/1050mA
	Output Power	8.75W~29.4W	17.5W~44.1W
	Strobe Level	Flicker free
	Dimming Range	0 ~ 100%, LED dimming from 0.03%
	PWM Dimming Frequency	>3600Hz
	Current Accuracy	±3%
	Power down mode	Active signal, no signal access, output the maximum set current
INPUT	Dimming Interface	0-10V 1-10V 10vpwm 100k potentiometer signal interface current < 0.1mA
	Input Voltage Range	100-250Vac
	Frequency	50/60Hz
	Input Current	<0.3A ac110v	<0.5A ac110v
	Power Factor	PF>0.99/100V	PF>0.99/100V
	THD	230Vac@THD <10% (at full load)
	Efficiency(typ.)	87%	88%
	Inrush Current(typ.)	cold start20A@230Vac	cold start20A@230Vac
	Anti Surge	L-N: 2kV
	Leakage Current	<0.25mA/230Vac
ENVIRONMENT	Working Temperature	ta: 45°C tc: 80 °C
	Working Humidity	20 ~ 95%RH, non-condensing
	Storage Temp., Humidity	-40 ~ 80°C°, 10~95%RH
	Temp.Coefficient	±0.03%/°C(0-50)°C
	Vibration	10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes.
PROTECTION	Over-heat Protection	Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, , auto recovers.
	Over Load Protection	Shut down the output when rated power≥102%, auto recovers.
	Short Circuit Protection	Shut down automatically if short circuit occurs, auto recovers.
	Non-load Protection	output Constant Voltage.
SAFETY & EMC	Withstand Voltage	I/P-O/P: 3750Vac
	Isolation Resistance	I/P-O/P: 100MΩ/500VDC/25°C/70%RH
	Safety Standards	IEC/EN61347-1, IEC/EN61347-2-13
	EMC Emission	EN55015, EN61000-3-2 Class C, IEC61000-3-3
	EMC Immunity	EN61000-4-2,3,4,5,6,8,11, EN61547
	Strobe Test Standard	IEEE 1789
OTHERS	Dimension	160(130)×43×30mm(L×W×H)
	Packing	PE bag
	Weight(G.W.)	245g±10g
Remarks	Conventional products are controlled by one way of brightness adjustment and one way of color temperature adjustment. Some intelligent systems in the market are controlled by two ways of brightness adjustment to mix color. Special instructions are needed, and our company has corresponding procedures The measured parameters are carried out under the input 230V AC environment of 25 degrees Constant current power supply, in the non dimming state, the output current is the maximum set value The voltage connected to the lamp shall be within the marked voltage range of the power supply This product adopts heat conduction silica gel heat dissipation process to balance the internal temperature and ensure the safety and reliability of the product Test distance of signal line: 1.5 square shielded wire, 200m with 20 power supplies. Due to the distance factor, the distance is lengthened, and the number of controls will be reduced

Dimension:

Label:

Led Current selection:

DIP switch for 8 optional currents' quick selection( see the table below ).

After current setting by DIP switch, power off and then power on to make the new current effective.

E.g. LED 3.2V/pcs: 9-24V can power 3-7pcs LEDs in series, 25-42V can power 7-12pcs LEDs, the max quantity of LEDs in series will be subject to the actual voltage of LED.

Wiring diagram:

The use of guidance:

The input end of the product is provided with an input line pressing cover with self-locking clamp. Use a slotted screwdriver to evenly force upward and slowly tilt it open to expose the input terminal, connect AC live line L and zero line n, and connect the output terminal according to the product identification. Pay attention to the positive and negative poles Note

1. When using this power supply, please pay attention to distinguish the input end and output end. Please wire correctly and power on only after checking Note

2. Please connect the load at the DC output first, confirm it is correct, and then turn on the power supply; In the constant current mode, if the open circuit is powered on, please turn off the power supply and connect the LED after the electric energy stored at the output end is released, otherwise the LED may be burned out Note

3. This power driver is only used for LED lamps. The input voltage range of the product is AC 100-265V. When it is used within the specified output voltage and current range, the ambient temperature is - 20 to + 45 ℃ , and the surface cannot be covered with thermal insulation cotton and other items that block the heat dissipation of the product. Under the environment that meets the service conditions of the product, this product enjoys a five-year free warranty.

Solutions to common problems during use:

1. The product does not work when powered on:

Check whether the pressure wire is connected properly, press the pressure wire terminal again,

Whether the positive and negative poles of the LED lamp are correct,

Whether the input and output are connected incorrectly.

Check whether the signal wire is short circuited (whether the signal lamp can be turned on when disconnected)

2. Power on flash lamp: 1. If the lamp flashes, please check whether the voltage of LED lamp is within the power supply voltage range

3. No color mixing temperature or brightness adjustment:

Please check whether the signal line is connected or short circuited.

Only brightness can be adjusted, not color mixing temperature. Please check whether the system is a two-way system that adjusts brightness, temperature and color at the same time

4. Since the power supply is controlled by low-voltage line number, shielded signal lines shall be used as much as possible in the actual use to ensure the control quantity and distance

Difference between 0-10V and 1-10V:

1.When the 0 / 10V dimmer is adjusted to the maximum 10V, the output current will reach 100% of the power output, and the brightness will reach 100%. When the 0-10V dimmer is adjusted to 0V,the current will be the minimum, and the light will be turned off; When the 1-10V dimming is adjusted to 1V, the current is the minimum and the light is off.

2.Difference between 0-10V and 1-10V dimming: different starting and closing voltage, 0-10V is on at 0.7V, (the min brightness) 1-10V is on at 1.2V (the min brightness).

3.Digital dimming driver 0-10V and 1-10V dimming automatic identification two dimming modes.

4.The same signal circuit controls light and dark at the same time.

5.Dimmer (dimming system) is divided into 0-10V and 1-10V dimming signals.

6.Dimming compatibility is related to the control distance of signal line and the number of control power supply. If the number is too large or the signal line is too long, problems such as can not adjusted lower and can not adjusted off will occur.

Hot Tags: 45W Constant Current 0-10V CCT Dimmable LED Driver, China, Manufactures, Suppliers, Factory, In Stock, Bulk, Quality, Classy, CE

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.

Products

Contact Us

45W Constant Current 0-10V CCT Dimmable LED Driver

STARWELL, a reputable manufacturer in China, is willing to offer you 45W Constant Current 0-10V CCT Dimmable LED Driver. We promise to provide you with the best after-sale support and prompt delivery.

Send Inquiry

DATASHEET

Product Details

Product Tag

PE-N14ACA led driver

pe-n20aca led driver

pe-n45aca led driver

intelligent dimmable led driver

0-10v cct tunable driver

0 to 10v cct tunable led driver

color temperature tunable led driver

Related Category

Constant Current Triac Dimmable LED Driver

Constant Voltage Triac Dimmable LED Driver

Constant Current 0-10V Dimmable LED Driver

Constant Voltage 0-10V Dimamble LED Driver

Constant Current 0-10V CCT Dimmable LED Driver

Constant Current DALI Dimmable LED Driver

Constant Voltage DALI Dimmable LED Driver

Constant Current DALI CCT Dimmable LED Driver

Constant Voltage DALI CCT Dimmable LED Driver

TUYA Zigbee CCT Dimmable LED Driver

Send Inquiry

Related Products

20W Constant Current 0-10V CCT Dimmable LED Driver

30W Constant Current 0-10V CCT Dimmable LED Driver

15W Constant Current 0-10V CCT Dimmable LED Driver