- English
- Español
- Português
- русский
- Français
- 日本語
- Deutsch
- tiếng Việt
- Italiano
- Nederlands
- ภาษาไทย
- Polski
- 한국어
- Svenska
- magyar
- Malay
- বাংলা ভাষার
- Dansk
- Suomi
- हिन्दी
- Pilipino
- Türkçe
- Gaeilge
- العربية
- Indonesia
- Norsk
- تمل
- český
- ελληνικά
- український
- Javanese
- فارسی
- தமிழ்
- తెలుగు
- नेपाली
- Burmese
- български
- ລາວ
- Latine
- Қазақша
- Euskal
- Azərbaycan
- Slovenský jazyk
- Македонски
- Lietuvos
- Eesti Keel
- Română
- Slovenski
- मराठी
- Srpski језик
Products
- Quick Charger
- Power Adapter
- Switching Power Supply
- Led Driver
- Dimmable Led Driver
- Constant Current Triac Dimmable LED Driver
- Constant Voltage Triac Dimmable LED Driver
- Constant Current 0-10V Dimmable LED Driver
- Constant Voltage 0-10V Dimamble LED Driver
- Constant Current 0-10V CCT Dimmable LED Driver
- Constant Current DALI Dimmable LED Driver
- Constant Voltage DALI Dimmable LED Driver
- Constant Current DALI CCT Dimmable LED Driver
- Constant Voltage DALI CCT Dimmable LED Driver
- TUYA Zigbee CCT Dimmable LED Driver
- POE Injector
- Battery Charger
Contact Us
- Engineer support
- +86-755-29634321
- support@starwell.cc
30W Constant Current 0-10V Dimmable LED Driver
STARWELL is a reputable Chinese manufacturer and supplier with years of experience specializing in 30W Constant Current 0-10V Dimmable LED Driver production. We hope to establish commercial ties with you.
Send Inquiry
DATASHEET
Product Details
Find a huge selection of 30W Constant Current 0-10V Dimmable LED Driver from China at STARWELL.
0-10V/1-10V/10V PWM/100K resistor dimming driver is one of the constant current dimming LED driver developed by my company with high power factor, high efficiency, high precision, the use of the efficient stable low loss switch control chip and the high performance components makes it with low noise, energy saving, environmental protection, long life and other characteristics.
PE-N30AA/PE-N45AA have five dimming function ,use the DIP switch to choose the PUSH dimming.
Dimming interface:
1.0-10V dimming, use standard 0-10V/100K 10V PWM dimming.
2.PUSH dimming.
30W Constant Current 0-10V Dimmable LED Driver Features:
1. Integrated 0-10V/1-10V/10V PWM/100k resistor dimming
2. Output flicker free
3. International universal AC input voltage(100-265VAC)
4. Protections: short circuit-over voltage/over current
5. Silica gel heat conduction technology, natural cold wind
6. Built- in MCU, will adaptive 0-10V and 1-10V
7. Dimming range 0-100%
8. Quick press terminal, safe and convenient
9. The internal design signal is connected to the reverse circuit, one of which will not affect the control of other driver
10. Protection class II
11. Five years warranty
12. TUV CE SAA C-TICK ENEC certificate
13. 147.5*42.5*30mm
30W Constant Current 0-10V Dimmable LED Driver Model list:
0/1-10V constant current dimming
| Series | Dimming | Model | Input | Power | PF | Output voltage | Output current |
|
PE-N30AA 21-30W |
0-10V 1-10V PWM 10V 100K Resistor PUSH |
PE-N30AA42 | AC100-250V | 29.4W | 0.88-0.96PF THD<10% | 9-42V | 350/400/450/500/550/600/650/700mA |
|
PE-N45AA 30-45W |
0-10V 1-10V PWM 10V 100K Resistor PUSH |
PE-N45AA42 | AC100-250V | 44.1W | 0.88-0.96PF THD<10% | 9-42V | 700/750/800/850/900/950/1000/1050mA |
30W Constant Current 0-10V Dimmable LED Driver Application:
1. Led monochrome light source
2. villa intelligent lighting
3. wireless intelligent lighting system can be accessed
4. museum lighting
5. high end commercial lighting
30W Constant Current 0-10V Dimmable LED Driver Specification:
| Model | PE-N30AA42 | PE-N45AA42 | |
| OUTPUT | Output Voltage | 9-42Vdc | 9-42Vdc |
| Max Output Voltage | 42Vdc | 42Vdc | |
| Non-load Output Voltage | 55Vdc | 55Vdc | |
| Output Current | 550/600/650/700mA | 900/950/1000/1050mA | |
| Output Power | 4.95W~29.4W | 8.1W~44.1W | |
| Strobe Level | No Flicker | ||
| Dimming Range | 0~100%，LED start at 0.03%possible. | ||
| PWM Dimming Frequency | >3600Hz | ||
| Current Accuracy | ±3% | ||
| Ripple & Noise | ≤2V（No dimming） | ||
| INPUT | Dimming Interface | 0-10V/1-10V/10V PWM/100K resistance , Signal control current < 0.1mA | |
| Input Voltage Range | 100-250Vac | ||
| Frequency | 50/60Hz | ||
| Input Current | <0.37A | <0.56A | |
| Power Factor | PF>0.95/100V ac, at full load | PF>0.95/100V ac, at full load | |
| THD | 230Vac@THD ≤15% (full load) | ||
|
Efficiency(tys.) |
85%full load | 87%full load | |
| Inrush Current(typ.) | Cold start 3.7A@230Vac | Cold start 5.6A@230Vac | |
| Anti Surge | L-N: 2kV | ||
| Leakage Current | <0.25mA/230Vac | ||
| ENVIRONMENT | Working Temperature | ta: 45 °C tc: 80°C | |
| Working Humidity | 20 ~ 95%RH, non-condensing | ||
| Storage Temp., Humidity | -40 ~ 80°C, 10~95%RH | ||
|
Temp. Coefficient |
±0.03%/°C(0-50) °C | ||
| Vibration | 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes. | ||
| PROTECTION | Over-heat Protection | Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, , auto recovers. | |
| Over Load Protection | Shut down the output when rated power≥102%, auto recovers. | ||
| Short Circuit Protection | Shut down automatically if short circuit occurs, auto recovers. | ||
| Non-load Protection | output Constant Voltage. | ||
| SAFETY & EMC | Withstand Voltage | I/P-O/P: 3750Vac | |
| Isolation Resistance | I/P-O/P: 100MΩ/500VDC/25°C/70%RH | ||
| Safety Standards | IEC/EN61347-1, IEC/EN61347-2-13 | ||
| EMC Emission | EN55015, EN61000-3-2 Class C, IEC61000-3-3 | ||
| EMC Immunity | EN61000-4-2,3,4,5,6,8,11, EN61547 | ||
| Strobe Test Standard | IEEE 1789 | ||
| OTHERS | Dimension | 147.5(117)×43×30mm(L×W×H) | |
| Packing | PE bag | ||
| Weight(G.W.) | 187/245g±10g | ||
Dimension:
LED Current Selection:
0-10V dimming & PUSH Dimming connection:
The use of guidance:
1.please pay attention to the distinction between input and output, connect correctly, then power on.
2.please connect first the load of the DC output, open the driver after checking; in the constant current mode, if power on at open circuit, please turn off the driver and can’t connect the LED until the electric energy stored by the output release, or it may damage the LED.
3.this type of driver is only limited to the use of the LED lamps ,the input voltage range is AC100-265V,the heat insulation cotton and other items that obstruct the heat dissipation of the product, which conforms to the product under the specified output voltage, current range, the use environment temperature is -20-45 degrees, and the surface can not cover the conditions of the environment, this product enjoys five years of free warranty.
The abnormal conditions and the corresponding treatment methods:
1.the LED lamp doesn’t bright after the driver is connected at the first time, please turn off the AC input and check as follow:
1)whether or not DC output bad contact.
2)whether DC output polarity is reversed, or the LED board is welded anti.
3)whether AC input is bad contact, test after eliminating these failures.
2.the device has good connection, LED lights, but the LED flicker, please turn off the AC input and check as follow:
1).whether or not the parameters and actual parameters match.
2).please timely communicate with us if you have any questions in the using, we will try our best to solve the problems with you.
Statement:
The pictures and specifications is for reference only, in kind prevail, specifications are subject to change with further notice.
Difference between 0-10V and 1-10V:
1.When the 0 / 10V dimmer is adjusted to the maximum 10V, the output current will reach 100% of the power output, and the brightness will reach 100%. When the 0-10V dimmer is adjusted to 0V, the current will be the minimum, and the light will be turned off; When the 1-10V dimming is adjusted to 1V, the current is the minimum and the light is off.
2.Difference between 0-10V and 1-10V dimming: different starting and closing voltage, 0-10V is on at 0.7V, (the min brightness) 1-10V is on at 1.2V (the min brightness).
3.Digital dimming driver 0-10V and 1-10V dimming automatic identification two dimming modes.
4.The same signal circuit controls light and dark at the same time.
5.Dimmer (dimming system) is divided into 0-10V and 1-10V dimming signals.
6.Dimming compatibility is related to the control distance of signal line and the number of control power supply. If the number is too large or the signal line is too long, problems such as can not adjusted lower and can not adjusted off will occur.
Hot Tags: 30W Constant Current 0-10V Dimmable LED Driver, China, Manufactures, Suppliers, Factory, In Stock, Bulk, Quality, Classy, CE
Product Tag
0-10V dimmable led power supply
1-10v dimmable led power supply
0/1-10v dimmable led power supply
constant current 0-10v dimmable led power supply
constant voltage 0-10v dimmable led power supply
constant current 1-10v dimmable led power supply
constant voltage 1-10v dimamble led power supply
constant current 10v dimmable led power supply
constant voltage 10v dimmable led power supply
ce dimmable led power supply
Related Category
Constant Current Triac Dimmable LED Driver
Constant Voltage Triac Dimmable LED Driver
Constant Current 0-10V Dimmable LED Driver
Constant Voltage 0-10V Dimamble LED Driver
Constant Current 0-10V CCT Dimmable LED Driver
Constant Current DALI Dimmable LED Driver
Constant Voltage DALI Dimmable LED Driver
Constant Current DALI CCT Dimmable LED Driver
Constant Voltage DALI CCT Dimmable LED Driver
TUYA Zigbee CCT Dimmable LED Driver
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
