STARWELL is one of professional leader China 40W Constant Current Triac Dimmable LED Driver manufacturers with high quality and reasonable price. Welcome to contact us.
Triac dimming is an efficient lighting control technique that provides smooth and flicker-free dimming. It offers a wide range of brightness adjustment and is compatible with various light sources.
PE-M40TA is ultra small size design, the raw materials used are first-line brands, imported chip ultra deep dimming design, matching various European brands of dimmers Anti surge voltage 1.8KV, smooth dimming, flicker free, adjustable current design, low noise in dimming process.
40W Constant Current Triac Dimmable LED Driver Features:
. LED Triac dimming driver ,dimming range 0.02-100%
. Suitable for RPC MOSFET dimmer and FPC TRAIC dimmer
. Protection type: short circuit / over current / over voltage
. Natural air cooling and heat dissipation
. Ultra small volume design
. Conform to the world lighting equipment safety standards
. Protection class II
. 5 year warranty
. The design of crimping cover is convenient and fast
. 4 gear current selection
. Certificate: CE ERP SAA C-tick
. Size: 175*40.5*25.5mm
40W Constant Current Triac Dimmable LED Driver Model list:
Series | Model | Input | Power | PF | Output voltage | Output current | Cert. |
PE-M10TA 10W |
PE-M10TA42 | AC200V-250V | 10W | 0.88-0.96PF | 26-42V | 150/180/220/ 250MA DIP switch |
CE ERP SAA C-tick |
PE-M20TA 10-20W |
PE-M20TA4245 | AC200V-250V | 18.9W | 0.88-0.96PF | 26-42V | 300/350/400/ 450MA DIP switch |
CE ERP SAA C-tick |
PE-M20TA4255 | AC200V-250V | 23.1W | 0.88-0.96PF | 26-42V | 400/450/500/ 550MA DIP switch | ||
PE-M30TA 20-30W |
PE-M30TA42 |
AC200V-250V |
29.4W | 0.88-0.92PF | 26-42V | 550/600/650/ 700MA DIP switch |
CE ERP SAA C-tick |
PE-M40TA 30-40W |
PE-M40TA42100 |
AC200V-250V |
40W | 0.88-0.92PF | 26-42V | 850/900/950MA/1000MA25-38V DIP switch |
CE ERP SAA C-tick |
PE-M40TA4285 | 35.7W | 26-42V | 700/750/800/ 850MA DIP switch |
40W Constant Current Triac Dimmable LED Driver Application:
1. Led monochrome light source
2. Villa intelligent lighting
3. Access to wireless intelligent lighting system
4. Museum lighting
5. High end commercial lighting
40W Constant Current Triac Dimmable LED Driver Specification:
Model | PE-M40TA42 | |
OUTPUT | Output Voltage | 26-42Vdc |
Max Output Voltage | 42Vdc | |
Non-load Output Voltage | 47Vdc | |
Output Current | 850/900/950/1000mA | |
Output Power | 22.1W~42W | |
Strobe Level | No Flicker | |
Dimming Range | 0~100%,LEDstart at 0.02%possible. | |
PWM Dimming Frequency | >3600Hz | |
Current Accuracy | ±5% | |
Power down mode | / | |
INPUT | Dimming Interface | AC phase cut dimming (Triac dimming) |
Input Voltage Range | 200-250Vac | |
Frequency | 50/60Hz | |
Input Current | <0.22A ac200v | |
Power Factor | PF>0.98/230V ac(at full load) | |
THD | 230Vac@THD <18% (at full load) | |
Efficiency(typ.) | 87% | |
Inrush Current(typ.) | cold start20A@230Vac | |
Anti Surge | L-N: 1.8kV | |
Leakage Current | <0.8mA/230Vac | |
ENVIRONMENT | Working Temperature | ta: 45°C tc: 85 °C |
Working Humidity | 20 ~ 95%RH, non-condensing | |
Storage Temp., Humidity | -40 ~ 80°C, 10~95%RH | |
Temp.Coefficient | ±0.03%/°C(0-50)°C | |
Vibration | 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes. | |
PROTECTION | Over-heat Protection | Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, , auto recovers. |
Over Load Protection | Shut down the output when rated power≥102%, auto recovers. | |
Short Circuit Protection | Shut down automatically if short circuit occurs, auto recovers. | |
Non-load Protection | output Constant Voltage. | |
SAFETY & EMC |
Withstand Voltage | I/P-O/P: 3750Vac |
Isolation Resistance | I/P-O/P: 100MΩ/500VDC/25°C/70%RH | |
Safety Standards | IEC/EN61347-1, IEC/EN61347-2-13 | |
EMC Emission | EN55015, EN61000-3-2 Class C, IEC61000-3-3 | |
EMC Immunity | EN61000-4-2,3,4,5,6,8,11, EN61547 | |
Strobe Test Standard | IEEE 1789 | |
OTHERS | Dimension | 174X45.2X25.5mm(L×W×H) |
Packing | PE bag | |
Weight(G.W.) | 248g±10g |
Dimensions:
Wiring Diagram:
LED current selection:
Dip switch quickly selects the current value setting of gear 4 (see the table for specific methods)
Assuming that the voltage of LED is 3.2v/piece, the output voltage range of power supply 9-24v can be connected in series with 3-7 LEDs, and the output voltage range of 26-42v can be connected in series with 8-12 LEDs, The maximum number of series is subject to the actual voltage of the LED.
Attention:
Note 1 When using this power supply, please pay attention to distinguish the input end and output end. Please wire correctly. The output can be divided into positive and negative poles. It can be powered on only after checking it;
Note 2 Please connect the load at the DC output first, confirm it is correct, and then turn on the power supply; In the constant current mode, if the open circuit is powered on, please turn off the power supply and connect the LED after the electric energy stored at the output end is released, otherwise the LED may be burned out;
Note 3 This power driver is limited to LED lamps. The input voltage range of the product is ac200-250v, the output voltage range is within the specified voltage range, the output current is within the specified use range, the operating ambient temperature is - 20 to + 45 ℃, and the surface cannot be covered with thermal insulation cotton and other items that block the heat dissipation of the product. Under the environment that meets the service conditions of the product, this product enjoys a 5-year free warranty.
1. If the power supply does not light up after the electrical connection of the device for the first time, please cut off the AC input terminal and check:
a) Whether the DC output terminal has poor contact;
b) Whether the positive and negative poles of DC output end are connected reversely and whether the LED board is welded reversely;
c) Whether the AC input terminal has poor contact; Remove the above faults before testing.
2. After the device is electrically connected, the LED light is on, but the LED light flashes. Please cut off the AC input and check the DC output:
a) Whether there is overload, overload and light load;
b) The design parameters of the power supply are inconsistent with the actual use parameters (whether they are within the design output voltage range of the power supply).