10W Constant Current Triac Dimmable LED Driver

10W Constant Current Triac Dimmable LED Driver

As one of professional manufacturers in China, STARWELL would like to provide you 10W Constant Current Triac Dimmable LED Driver. And we will offer you the best after-sale service and timely delivery.
Triac dimming with no flicker provides smooth, efficient, and flexible lighting control, making it a popular choice for applications where visual comfort, energy efficiency, and precise dimming capabilities are required.

Send Inquiry

Product Details

STARWELL, a reputable manufacturer in China, is willing to offer you 10W Constant Current Triac Dimmable LED Driver. We promise to provide you with the best after-sale support and prompt delivery.

Triac dimming with no flicker provides smooth, efficient, and flexible lighting control, making it a popular choice for applications where visual comfort, energy efficiency, and precise dimming capabilities are required.

PE-M10TA is ultra small size design, the raw materials used are first-line brands, imported chip ultra deep dimming design, matching various European brands of dimmers Anti surge voltage 2KV, smooth dimming, flicker free, adjustable current design, low noise in dimming process.


10W Constant Current Triac Dimmable LED Driver Features:

1. LED Triac dimming driver ,dimming range 0.03-100%

2. Suitable for RPC MOSFET dimmer and FPC TRAIC dimmer

3. Protection type: short circuit / over current / over voltage

4. Natural air cooling and heat dissipation

5. Ultra small volume design

6. Conform to the world lighting equipment safety standards

7. Protection class II

8. 5 year warranty

9. The design of crimping cover is convenient and fast

10. 4 gear current selection

11. CE ERP SAA C-TICK certificate

12. 116*30*21mm


10W Constant Current Triac Dimmable LED Driver Model list:

Series Model Input Power PF Output voltage Output current
PE-M10TA
10W
PE-M10TA42 AC200V-250V 10W 0.88-0.96PF 26-42V 150/180/220/250MA
PE-M20TA
10-20W
PE-M20TA4245 AC200V-250V 18.9W 0.88-0.96PF 26-42V 300/350/400/450MA
PE-M20TA4255 AC200V-250V 23.1W 0.88-0.96PF 26-42V 400/450/500/550MA
PE-M30TA
20-30W
PE-M30TA42
AC200V-250V
29.4W 0.88-0.92PF 26-42V 550/600/650/700MA
PE-M40TA
30-40W
PE-M40TA42100
AC200V-250V
40W 0.88-0.92PF 26-42V 850/900/950MA/1000MA
PE-M40TA4285 35.7W 26-42V 700/750/800/850MA



10W Constant Current Triac Dimmable LED Driver Application:

1. Led monochrome light source

2. Villa intelligent lighting

3. Access to wireless intelligent lighting system

4. Museum lighting

5. High end commercial lighting


10W Constant Current Triac Dimmable LED Driver Specification:


Model PE-M10TA42
OUTPUT Output Voltage 26-42Vdc
Max Output Voltage 42Vdc
Non-load Output Voltage 54Vdc
Output Current 150/180/220/250mA
Output Power 3.9W~10.5W
Strobe Level No Flicker
Dimming Range 0~100%,LEDstart at 0.03%possible.
PWM Dimming Frequency >3600Hz
Current Accuracy ±5%
Power down mode /
INPUT Dimming Interface AC phase cut dimming (Triac dimming)
Input Voltage Range 200-250Vac
Frequency 50/60Hz
Input Current <0.065A ac200v
Power Factor PF>0.98/230V ac(at full load)
THD 230Vac@THD <16% (at full load)
Efficiency(typ.) 83%
Inrush Current(typ.) cold start0.3A@230Vac
Anti Surge L-N: 2kV
Leakage Current <0.25mA/230Vac
ENVIRONMENT Working Temperature ta: 45°C tc: 85 °C
Working Humidity 20 ~ 95%RH, non-condensing
Storage Temp., Humidity -40 ~ 80°C, 10~95%RH
Temp.Coefficient ±0.03%/°C(0-50)°C
Vibration 10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes.
PROTECTION Over-heat Protection Intelligently adjusting or turning off the output current if the PCB temperature ≥110°C, , auto recovers.
Over Load Protection Shut down the output when rated power≥102%, auto recovers.
Short Circuit Protection Shut down automatically if short circuit occurs, auto recovers.
Non-load Protection output Constant Voltage.
SAFETY
& EMC
Withstand Voltage I/P-O/P: 3750Vac
Isolation Resistance I/P-O/P: 100MΩ/500VDC/25°C/70%RH
Safety Standards IEC/EN61347-1, IEC/EN61347-2-13
EMC Emission EN55015, EN61000-3-2 Class C, IEC61000-3-3
EMC Immunity EN61000-4-2,3,4,5,6,8,11, EN61547
Strobe Test Standard IEEE 1789
OTHERS Dimension 116×30×21mm(L×W×H)
Packing PE bag
Weight(G.W.) 60g±5g



10W Constant Current Triac Dimmable LED Driver Dimensions:

Wiring diagram:

LED Current setting:

Dip switch quickly selects the current value setting of gear 4 (see the table for specific methods)

Dip switch quickly selects the current value setting of gear 4 (see the table for specific methods)

Assuming that the voltage of LED is 3.2v/piece, the output voltage range of power supply 9-24v can be connected in series with 3-7 LEDs, and the output voltage range of 26-42v can be connected in series with 8-12 LEDs, The maximum number of series is subject to the actual voltage of the LED.


Attention:

Note 1 When using this power supply, please pay attention to distinguish the input end and output end. Please wire correctly. The output can be divided into positive and negative poles. It can be powered on only after checking it;

Note 2 Please connect the load at the DC output first, confirm it is correct, and then turn on the power supply; In the constant current mode, if the open circuit is powered on, please turn off the power supply and connect the LED after the electric energy stored at the output end is released, otherwise the LED may be burned out;

Note 3 This power driver is limited to LED lamps. The input voltage range of the product is ac200-250v, the output voltage range is within the specified voltage range, the output current is within the specified use range, the operating ambient temperature is - 20 to + 45 ℃, and the surface cannot be covered with thermal insulation cotton and other items that block the heat dissipation of the product. Under the environment that meets the service conditions of the product, this product enjoys a 5-year free warranty.

1. If the power supply does not light up after the electrical connection of the device for the first time, please cut off the AC input terminal and check:

a) Whether the DC output terminal has poor contact;

b) Whether the positive and negative poles of DC output end are connected reversely and whether the LED board is welded reversely;

c) Whether the AC input terminal has poor contact; Remove the above faults before testing.

2. After the device is electrically connected, the LED light is on, but the LED light flashes. Please cut off the AC input and check the DC output:

a) Whether there is overload, overload and light load;

b) The design parameters of the power supply are inconsistent with the actual use parameters (whether they are within the design output voltage range of the power supply).




Hot Tags: 10W Constant Current Triac Dimmable LED Driver, China, Manufactures, Suppliers, Factory, In Stock, Bulk, Quality, Classy, CE

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.